oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-if120.0m-c 120.0 mhz if saw filter 20.1 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-if120.0m-c january 2011 rev a 120.0 mhz if saw filter 20.1 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1= 56 nh, c1= 33 pf output l2= 68 nh, c2= 20 pf source/load impedance 50 ?
oscilent part number 821-if120.0m-c january 2011 rev a 120.0 mhz if saw filter 20.1 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 119.9 120.0 120.1 insertion loss at fo db - 21.5 25.5 amplitude ripple variation at fo 9.75 mhz db p-p - 0.7 1.0 group delay variation at fo 9.75 mhz nsec - 40 100 absolute delay at fo sec - 2.3 - temperature coefficient ppm/c - -72 - bandwidth at ?1.0 db mhz - 20.2 - bandwidth at ?3.0 db mhz 20.4 20.5 - bandwidth at ?40.0 db mhz - 21.8 22.0 lower sidelobe db 50 - - upper sidelobe db 50 - -
oscilent part number 821-if120.0m-c january 2011 rev a 120.0 mhz if saw filter 20.1 mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|